4 point prober마크.gif                                            

 

 영국 Jandel社 제품 전품목 공급.                    

 

4포인트프로브: 4 point probe
 

 

Jandel Multi Height Four-Point Probe Stand

Multi Height Probe shown probing an ingot

Multi Height Probe shown probing an 8" wafer

 

 

Jandel Multiposition Wafer Probing System     Jandel Multiposition Wafer Probe.



* 8" and 6" versions available

* Lever operated probe with switched current leads to prevent sparking

* Repositioning accuracy within 1mm

* Precision low maintenance slides

* shrouded measuring area to minimize light and electrical interference

 

     Jandel Multiheight Wafer Probe.



* Height adjustable to cope with samples from thin films to large ingots

* Lever operated probe with switched current leads to prevent sparking

* Measures samples up to 10" deep

* Width of sample limited only by need to support ends

 

        Jandel Hand Applied Probe.



* Insulating PTFE body

* 4-point cylindrical probe head is easily changed

* Shorting switch to prevent sparking

* Easy placement by hand

* Measurement of large samples unable to fit on standard test equipment

 

 pcb21@korea.com                                      HOME

 

JANDEL 4 POINT PROBE        Jandel Universal Probe Station.



* Highly repeatable needle contact conditions

* Individually adjustable needle loadings with direct indication of set load

* Micrometer controlled slice displacement

* 4-point measurement of wafer resistivity and 3-point spreading resistance measurements

* Hinged steel cover to eliminate effects of light and electrical interference

 

      Jandel Microposition Probe Station.



* X-Y Micro-manipulation of small samples

* 3" diameter sample capacity

* Sample can be retained by vacuum

* Lever operated probe with switched current leads to prevent sparking

* Optional probe head shroud to shield light from any sample up to 2" diameter

 

 pcb21@korea.com                                      HOME

 

     Jandel Resistivity Test Unit - Combined constant current source and digital voltmeter.



* Constant current source and digital voltmeter combined in one case

* Single cable connection to probe

* Compliance voltage warning light

* 1% accuracy

* CE Marked

* Easily calibrated

 

  Jandel probe heads are manufactured and there is one to fit all mountings and systems

Exclusive Features:

* Aluminium alloy upper AND lower guides are both jewelled

* Solid Tungsten Carbide needles offer superior durability

* PTFE Insulation gives minimum leakage

* Loads checked by electronic force gauge

* Spacing and tip radii optically checked for accuracy by interferometer

 

JANDEL사 동아무역 공급   Jandel probe head suitable for use on KLA/Tencor/Prometrix equipment.

* Aluminium alloy upper AND lower guides are both jewelled

* Solid Tungsten Carbide needles offer superior durability

* PTFE Insulation gives minimum leakage

* Loads checked by electronic force gauge

* Spacing and tip radii optically checked for accuracy by interferometer

 

 

 

 

 

 모델명: K89PS40μR                                          모델명: K89PS150μR

재질 :   텅스텐 카바이드                                               재질 :   텅스텐 카바이드

프로부 간 거리 : 1㎜                                                    프로부 간 거리 : 1㎜

프로부 끝 반경 : 40μR                                                 프로부 끝 반경 : 150μR

침 압 : 약 800g                                                            침 압 : 약200g

외형 치수 : 외경21x높이 41 ㎜                                      외형 치수 : 외경21x높이 41 ㎜

중량 : 약 70g                                                               중량 : 약 70g

옵션 : 폐사제 측정기용 코넥터                                     옵션 : 폐사제 측정기용 코넥터

                                                           

 

 K-90PS

저고용 4포인트브로브

드라이버를 회전 시키는 것에 의해 프로부는       

상하 이동합니다.샘플을 바늘로 눌러 고정시켜

액체 질소에 적셔 측정해 주십시오.

 

  상기와 같이  8봉 리드선(측정용4봉,열전대2봉, 히터용 2봉)  이 나와 있습니다. 확인 한 후에 배선해 주십오.                                                                                                      

(주의) 온도 콘트롤라는 사양에 의해 제작합니다.

                                      

동아는 PCB-LCD-FPCB-반도체 연구,생산장비 전문 공급회사입니다.

반도체-PCB-LCD-FPC 연구장비-생산장비,실습-연구기자재,전자재료,
스핀코터,마스크얼라이너,,4포인트프로브,박막측정기,저항측정기, 와이어본더, 진공 펌프,

레이저스펙트로미터, 전주도금기, 홀로그래픽,chiller (Neslab), 스크라이버, 디솔더링,
솔더링, Stencil Printer, BGA-SMD REWORK SYSTEM, Wave soldering system,
선하야토 감광기판,노광기,현상기,에칭기,pcb에어졸, 키엔스센서, IC아답터 & 소켓,
PCB코팅제-세정제, 각종 소모품, 전자부품-전자재료 유통 납품업 & 수출입.

 

 


 pcb21@korea.com                                          Home